Wholesale PVC Louver Blade Moulding
Brand :Potentech
Product origin :Guangzhou, China
Delivery time :within 30 days
Supply capacity :20 containers per month
Potentech PVC Louver Blade Moulding is an innovative environmental product that requires minimal maintenance and can be easily cleaned with soap and water.
It is also lightweight and simple to install, offering superior nailing and gluing capabilities.
Furthermore, it is highly resistant to scratches, eliminating the need for painting unless desired.
And Potentech PVC Louver Blade does not rot, crack, split or warp, it is resistant to water, termites, and insects, fire retardant, and has resistance to chemicals and corrosion.
Additionally, it is 100% recyclable.
Potentech PVC Louver Blade Moulding add home decor accents to the interior and exterior of your home or commercial building.
To enhance the beauty and style of your home by emphasizing contrast and transition along your walls, doorframes, baseboards and much more.
When considering the cost of PVC products like Potentech PVC Louver Blade Moulding and alternatives it is important to not only consider the sales price but also to consider any direct and indirect costs throughout the product life and at the end of life when the product becomes waste.
A study which examined several major applications for PVC was completed for the UK Government in 2001 and concluded that, "The life-cycle costs of PVC products would appear to involve significantly lower costs than equivalent products made out of alternative materials."
Application
Machining working guide
●Sawing
High-speed bandsaws and circular saws with a cutting speed of up to 3000 m/min are recommended.
Depending on the thickness of the sheets, saw blades with a tooth pitch of between 5 and 10 mm are used.
For circular saws, it is normally recommended to use blades with a tooth geometry that alternates between flatteeth, trapezoidal teeth and carbide-tipped teeth.
The saw blade diameter and the number of teeth must be coordinated to match the material to be machined, the machine type and the machine speed.
In order to obtain clean edges to cuts and to avoid cracking, always clamp the sheet material in the workholding fixture in such a way that it does not vibrate.
This is especially important for thin sheets with a thickness of 1-3 mm, not only when machining them singly but also in a stack.
In particular cases, it may be advisable to make use of the consulting service offered by the saw-blade manufacturer.
●Drilling
All PVC Foam sheets in question can be drilled using the sort of twist drills familiar from drilling metals, whose angle of twist is approx. 30°.
The point (or nose) angle can be up to approx. 110%, while the lip relief angle should be no smaller than 12-16“
The cutting and feed speeds depend on the depth of the hole to be drilled: the thicker the sheet, the slower the speed.
For holes larger than 20 mm in diameter, two-flute cutters with pilots are used.
Holes larger than 40 mm in diameter are cut using circular cutters (e.g. quick-helix drills)
●Laser cutting
Due to the heat that is transferred to the material during laser cutting, this process is unsuitable for PVC foamsheets.
By choosing Potentech PVC Mouldings over traditional wood you also increase the durability of your home with a product that provides lasting beauty for years to come.
You'll be enjoying your new cellular PVC moulding decorative home accents and crown moulding styles for years to come.
