How to paint PVC Trimboard?

PVC Trimboard

Potentech Trimboard Sealed Edges Sealed edges on 2 sides.

Potentech Sealed Edges Trimboard is a technology designed to keep boards cleaner for longer periods of time. And let the edge look more smooth.

Potentech Sealed Edges and non-sealed edges Trimboard are also available on woodgrain texture finish.

More than just a smooth finish, Potentech Sealed Edges Trimboard is a sealed edge that resists staining from dirt and grime and easily wipes clean if dirt should come in contact with the trimboards.

Potentech Sealed Edges Trimboard is the result of months of research and innovative engineering developed by ourself. We alway keep doing to provide high-quality and better products to our customers.

Steps to paint PVC Trimboard

Painting PVC (polyvinyl chloride) trim can give it a fresh look and help protect it from the elements.

Here's a step-by-step guide on how to paint PVC trim:

Clean the PVC Trim:

Begin by cleaning the PVC trim thoroughly. Use a mixture of warm water and mild soap to remove any dirt, grease, or other contaminants.

Rinse the trim with clean water and allow it to dry completely.

Sand the PVC Trim:

Lightly sand the PVC trim with 220-grit sandpaper.  This helps create a slightly rough surface for better paint adhesion.

Wipe away any sanding dust with a tack cloth or a clean, lint-free cloth.

Apply Primer:

Apply an exterior-grade acrylic latex primer to the PVC trim.  Use a paintbrush or foam brush to ensure even coverage.

Allow the primer to dry according to the manufacturer's instructions.  Typically, this takes around 2-4 hours.

Inspect and Sand (Optional):

After the primer is dry, inspect the trim for any imperfections or rough spots.

If necessary, lightly sand any rough areas and wipe away the sanding dust.

Apply Paint:

Use an exterior-grade acrylic latex paint in your desired color.  Semi-gloss or satin finishes are often recommended for trim.

Apply the paint in thin, even coats, using a paintbrush.  Brush strokes should go in the same direction as the length of the trim.

If you prefer, you can also use a paint roller for larger areas of trim.

Allow each coat to dry before applying the next.  Typically, you'll need 2-3 coats for good coverage.

Allow to Dry:

Let the final coat of paint dry thoroughly, following the paint manufacturer's recommended drying times.  This may take 24 hours or more.

Remove Painter's Tape:

If you used painter's tape to protect adjacent surfaces, carefully remove it after the paint has dried.

Clean Up:

Clean your brushes and other painting tools with water if you used water-based paint.  If you used oil-based paint, use the appropriate solvent for cleanup.

Reinstall or Finish:

Once the paint is completely dry and cured, you can reinstall the PVC trim or finish your project as needed.

Remember to choose high-quality exterior-grade paints and primers for PVC trim to ensure durability and long-lasting results.  Proper surface preparation and paint application are key to achieving a smooth and even finish on PVC trim.

POTENTECH (GUANGDONG) LIMITED is the leading Manufacturer of PVC Foam Sheets, Trimboards and 80 styles Mouldings in Guangzhou.

   UNBEATABLE PRICE, SUPERIOR SERVICE, THE PREFERRED CHOICE FOR BUILDING, FURNITURE, PRINTING.

Over the past 18 years, our POTENTECH PVC Foam Sheets, Trimboards and 80 styles Mouldings have been used on thousands of high-end homes, cabinet, and signs.

POTENTECH PVC stands the test of time!

NO ORDER IS BIG OR SMALL !!! Every order is processed under the IOS9001:2008 standard.

If you would like to know more about PVC foam board, or you have the needs of custom PVC foam board, please feel free to Contact Us!