How to intall PVC window vinyl trim?

Measure the Window: Use a measuring tape to measure the length and width of the window where you'll be installing PVC window vinyl trim.   

Make sure to measure accurately to avoid any gaps or unevenness.

Cut the Vinyl Trim: Using a utility knife, cut the window trim mouldings pieces to match the measurements you've taken.   

Be precise with your cuts to ensure a proper fit.

Prepare the Surface: Clean the area around the window thoroughly to remove any dirt, dust, or debris.   

This will help the vinyl trim adhere properly.

Apply Caulk: Apply a thin bead of caulk along the edges of the window frame where the vinyl trim will be attached.   

This will help create a watertight seal and prevent moisture from seeping in.

Attach PVC trim board: Position the vinyl trim pieces around the window frame, making sure they are aligned properly and level.   

Use a level to check for straightness. Once positioned correctly, use nails or screws to secure the trim in place. 

Make sure to drive the fasteners into the studs or framing behind the wall for a secure hold.

Secure Corners: If your trim includes corner pieces, make sure they are securely attached and aligned with the adjacent pieces.   

You may need to use additional nails or screws to reinforce the corners.

Finish: Once all the trim pieces are installed, inspect the area for any gaps or imperfections.  

 Apply additional caulk as needed to fill in any gaps and create a seamless finish.

Click here learn more about window trim